Anionic polyacrylamide is the kind of wastewater treatment chemicals which is water-soluble linear polymer synthesized with high degree of polymerization. Anionic polyacrylamide powder is easily soluble in water and almost insoluble in common organic solvents such as benzene, ether, lipids and acetone.
It's more appropriate to use nonionic polyacrylamide as flocculants when the suspension of sewage is acidic. The suspending particles produce flocculation to purify water. When used in the city sewage, food processing waste water treatment, sludge dewatering, the positive charge could have neutralize effect with negative sludge groups in
Wastewater Treatment(Primary Clarification, Secondary & Tertiary Treatment, Dissolved Air Floatation) Specification of Anionic Polyacrylamide APAM For Waste Water(Solid Granule) CAS No.:9003-05-8 MF:【(C3H5NO)n】
Poly Aluminium Chloride (PAC) for Water Treatment. Poly aluminium chloride (PAC) , the white or yellow powder, is an inorganic polymer coagulant.Compared with traditional inorganic coagulants, fengbai poly aluminum chloride flocculation precipitation speed is fast, the PH value applicable range is wide, water purification effect is obvious and non-corrosive to pipeline equipment.
High molecular weight (10 6 –3 × 10 7 Da) polyacrylamide (PAM) is commonly used as a flocculant in water and wastewater treatment, as a soil conditioner, and as a viscosity modifier and
For example, the bulk prices of aluminum sulfate (Al 2 (SO 4) 3 ·14H 2 O) and ferric chloride (FeCl 3) in 2013 were US $318.90 and US $354.33 per metric ton, respectively [77]. On an unhydrated basis (i.e., for Al 2 (SO 4 ) 3 ), the price of aluminum sulfate was US $440.39 per metric ton.
wt (ten thousand) Ion degree % PH Solid content% residual monomeers 600-1200 10-50 1-14 ≥90 0.05 Anionic polyacrylamid (AAnionic polyacrylamide PAM and coagulant Poly Aluminium Chloride/PAC) mol. wt(ten thousand) degree of hydrolysis % PH Solid content% residual monomeers % 500-1800 10-50 7-14 ≥90 0.05-0.15 Nonionic Polyacrylamide (NAnionic polyacrylamide PAM and coagulant Poly Aluminium
Detail: Cationic Polyacrylamide C4030 water treatment chemicals flocculant coagulation sludge dewatering Principal Uses C4030is ahigh charge cationic Contact Supplier Xitao Polymer Co., Ltd.
There are a lot off suppliers providing cationic polyacrylamide coagulants flocculants on okchem.com, mainly located in Asia. The cationic polyacrylamide coagulants flocculants products are most popular in India, Pakistan, Vietnam, Indonesia, Brazil, Russia, Mexico, United States, Turkey, Germany, etc.
For example, the bulk prices of aluminum sulfate (Al 2 (SO 4) 3 ·14H 2 O) and ferric chloride (FeCl 3) in 2013 were US $318.90 and US $354.33 per metric ton, respectively [77]. On an unhydrated basis (i.e., for Al 2 (SO 4 ) 3 ), the price of aluminum sulfate was US $440.39 per metric ton.
anionic polyacrylamide pam polymer for incense stick making | Buy Waste Water Treatment Agent at factory price. Anionic Polyacrylamide Apam Specially For Incense Making Anionic polyacrylamide easily dissolve in water,but nearly not dissolve in organic solvent.It has high polymer electrolytical properties in middle and alkalinity media.While it's
Detail: Cationic Polyacrylamide C4030 water treatment chemicals flocculant coagulation sludge dewatering Principal Uses C4030is ahigh charge cationic Contact Supplier Xitao Polymer Co., Ltd.
Flocculant catalog of Factory Supply Polyacrylamide PAM for Wastewater Treatment, (C3H5NO) N PAM Chemical Powder for Water Solution provided by China manufacturer
Factory price quick coagulation and flocculation nonionic Polyacrylamide / nonionic polymer for water treatment $1,000.00 - $1,500.00 / Metric Ton 1000 Metric Tons (Min. Order)
We offers 3,714 anionic polymer water treatment chemicals products. About 74% of these are paper chemicals, 70% are petroleum additives, and 56% are leather auxiliary agents.
Polyacrylamide flocculation treatment of waste water, cover an area of an area small, less investment, strong adaptability, a brief, high processing efficiency, can control the space is large, etc. PH value is too low, acid easily provoked explosion together, constitute a crosslinking shape insolubles, spending anionic polyacrylamide and lower
For example, the bulk prices of aluminum sulfate (Al 2 (SO 4) 3 ·14H 2 O) and ferric chloride (FeCl 3) in 2013 were US $318.90 and US $354.33 per metric ton, respectively [77]. On an unhydrated basis (i.e., for Al 2 (SO 4 ) 3 ), the price of aluminum sulfate was US $440.39 per metric ton.
Water Treatment Chemicals Cationic Poly Acrylamide Polyelectrolye Flocculant Coagulant Pam Polyacrylamide Price - Buy Cationic Poly Acrylamide. Water treatment flocculant cationic anionic nonionic polyacrylamide Polyacrylamide is a linear polymer, which can be divided into nonionic, anionic and cationic according to its structure.
Previous study has demonstrated that a hybrid coagulant, the mixture of polyaluminum chloride (PAC) and ferric chloride (FC), is less dependent on wastewater pH and is more efficient in wastewater treatment, even under less dosage condition . Therefore, this hybrid coagulant may have the potential to improve HHFW purification without pH adjustment.
Flocculant catalog of Factory Supply Polyacrylamide PAM for Wastewater Treatment, (C3H5NO) N PAM Chemical Powder for Water Solution provided by China manufacturer
Factory price quick coagulation and flocculation nonionic Polyacrylamide / nonionic polymer for water treatment $1,000.00 - $1,500.00 / Metric Ton 1000 Metric Tons (Min. Order)
China Bluwat Bwd-01 Strong Decoloring Agent Coagulant for Waste Water Treatment, Find details about China Coagulant, Coagulant for Waste Water Treatment from Bluwat Bwd-01 Strong Decoloring Agent Coagulant for Waste Water Treatment.
Looking for affordable polyacrylamide low price? 611 low price polyacrylamide products from 203 trustworthy polyacrylamide suppliers.com. Reach out to suppliers directly and ask for the lowest price, discount, and small shipping fees.
NOTES: (1) Coagulants should be be pre-diluted in water for best results (2) Flocculants MUST be pre-diluted in water for any results (3) Add cationic coagulant as far back in the line as possible (4) Do not add anionic flocculant too close to cationic coagulant Primary / Secondary Wastewater Treatment System AERATION BASIN MIXED LIQUOR FINAL OR
NOTES: (1) Coagulants should be be pre-diluted in water for best results (2) Flocculants MUST be pre-diluted in water for any results (3) Add cationic coagulant as far back in the line as possible (4) Do not add anionic flocculant too close to cationic coagulant Primary / Secondary Wastewater Treatment System AERATION BASIN MIXED LIQUOR FINAL OR
One of the major applications of polyacrylamide is as flocculants or coagulants for treating municipal and industrial wastewater, as it causes suspended particles to aggregate and to precipitate when added to treat water. Anionic polyacrylamide is used extensively in water treatment and sludge de-watering.
Previous study has demonstrated that a hybrid coagulant, the mixture of polyaluminum chloride (PAC) and ferric chloride (FC), is less dependent on wastewater pH and is more efficient in wastewater treatment, even under less dosage condition . Therefore, this hybrid coagulant may have the potential to improve HHFW purification without pH adjustment.
Flocculant catalog of Factory Supply Polyacrylamide PAM for Wastewater Treatment, (C3H5NO) N PAM Chemical Powder for Water Solution provided by China manufacturer
Feature 1,Basic aluminum chloride in dealing with paper, printing and dyeing wastewater has a unique performance. 3,Waiting for the next dosage Basic aluminum chloride coagulant in the water hardness is less than when you consume a variety of inorganic coagulant, water treatment to reduce the PH value is also less.
View reliable Water Treatment Chemical manufacturers. This category presents PAC, Polyacrylamide, from China Water Treatment Chemical suppliers to global buyers.
Pac Water Treatment Chemical – manufacturer, factory . Poly aluminium chloride PAC is a new type high efficiency inorganic polymer coagulant adopting advanced manufacturing technique and quality raw material show the features of low impurity high molecula weight and superior coagulating effect Company profile Established in 1999 located in Yanzhou Chemical Industrial Park
Polyacrylamide flocculation treatment of waste water, cover an area of an area small, less investment, strong adaptability, a brief, high processing efficiency, can control the space is large, etc. PH value is too low, acid easily provoked explosion together, constitute a crosslinking shape insolubles, spending anionic polyacrylamide and lower